Due to the large volume of orders we are receiving, the current processing time for all orders will be 2-4 Business Days.
  • 0 Item(s)
  • $0.00
  • Empty Cart

6″ x 2″ Flat Linear Roll Spider

(1 Review) | Add A Review

$2.75$6.00

Clear
Quantity discounts
1-7 8-16 17-35 36-75 76+
$2.75 $2.34 $2.20 $2.06 $1.93
Quantity discounts
1-7 8-16 17-35 36-75 76+
$6.00 $5.10 $4.80 $4.50 $4.20
SKU: N/A Category:

6″ x 2″ Flat Linear Roll Spider

Spider Compliance:

0.25mm/50 grams

Weight 1 oz
Dimensions 12 × 10 × 1 in
Lead Wire

Non Leaded, Single Sewn Leads, Dual Sewn Leads, Triple Sewn Leads

1 review for 6″ x 2″ Flat Linear Roll Spider

  1. Mike (verified owner)

    I used this spider to repair my 8w7. The inner diameter will need to be widened to fit over the 8w7 voice coil. I did this carefully in about 15-20 minutes using a dremel and a sanding drum attachment.

    Note: After modification, the first roll in the spider on the inside will take up some space in the gap at the bottom of your factory collar. This gap is used to house the solder connections from the coil to the tinsel leads. Losing some space here made it difficult to sit the down collar flush with the spider. Through some trial and error, I ended up removing the factory tinsels and replacing with 1.6mm PVC insulated leads (https://thelordofbass.com/product/1-6mm-braided-tinsel-lead-wire-with-insulated-pvc-jacket/). This required some chiseling and dremeling to remove the factory tinsel leads and adhesives. I also removed some of the material in the gap at the bottom of the collar to create more space for the solder connections.

Add a review

Your email address will not be published. Required fields are marked *

Scroll to Top