Home » Products » SUBWOOFER / SPEAKER PARTS » Spiders » 2" VCID » 6″ x 2″ Flat Linear Roll Spider
5.39″ x 2″ Flat Linear Roll Spider
January 23, 20165.75″ x 2″ Flat Linear Roll Spider
January 23, 20166″ x 2″ Flat Linear Roll Spider
Rated 5.00 out of 5 based on 1 customer rating
(1 customer review)
$2.75 – $6.00
SKU: N/A
Category: 2" VCID
Description
6″ x 2″ Flat Linear Roll Spider
Spider Compliance:
0.15mm/50 grams
Additional information
Weight | 1 oz |
---|---|
Dimensions | 12 × 10 × 1 in |
Lead Wire | Non Leaded, Single Sewn Leads, Dual Sewn Leads, Triple Sewn Leads |
Reviews 1
1 review for 6″ x 2″ Flat Linear Roll Spider
Add a review Cancel reply
Mike (verified owner) –
I used this spider to repair my 8w7. The inner diameter will need to be widened to fit over the 8w7 voice coil. I did this carefully in about 15-20 minutes using a dremel and a sanding drum attachment.
Note: After modification, the first roll in the spider on the inside will take up some space in the gap at the bottom of your factory collar. This gap is used to house the solder connections from the coil to the tinsel leads. Losing some space here made it difficult to sit the down collar flush with the spider. Through some trial and error, I ended up removing the factory tinsels and replacing with 1.6mm PVC insulated leads (https://thelordofbass.com/product/1-6mm-braided-tinsel-lead-wire-with-insulated-pvc-jacket/). This required some chiseling and dremeling to remove the factory tinsel leads and adhesives. I also removed some of the material in the gap at the bottom of the collar to create more space for the solder connections.