Due to the large volume of orders we are receiving, the current processing time for all orders will be 2-4 Business Days.
  • 0 Item(s)
  • $0.00
  • Empty Cart

JL Audio 8W7 Single 3 Ohm Voice Coil

SKU VC180324 Category


Availability: In stock


JL Audio 8W7 Single 3 Ohm Voice Coil

Don’t throw away your expensive subwoofers just because the voice coil has burn out. With this new JL Audio 8W7 Single 3 Ohm Voice Coil from Lord of Bass, you can save a lot of money by replacing the voice coil and avoid costly subwoofer replacements. This voice coil is the exact replacement for 8W7 subs, so your JL Audio subwoofer will perform as it did when it was new from the factory


  • Former Height:  4.5″  (114.3mm)
  • Winding Width: 1.95″  (49.5mm) 
  • Outer Diameter: 2.364″  (30mm)
  • Inner Diameter: 2.254″  (57.3mm)
  • Impedance: Single 3 Ohm
  • Layers: 4
  • Former Material: Kapton 
  • Wire Material / Type: Flat aluminum wire
Weight 7 oz
Dimensions 2.3 × 2.3 × 4.5 in

1 review for JL Audio 8W7 Single 3 Ohm Voice Coil

  1. Mike (verified owner)

    Repaired my 8w7 with this voice coil. It uses flat aluminum wire, and is parallel wound, dual 6 ohm. In theory, from what I’ve read, this should have good power handing. The voice coil fits well, but the winding height seems to be a 1-2 mm shorter than the factory coil, thus lowers the x-max of your speaker. The factory coil uses round copper wire.

    Note: the lead connections on this coil are not the same as factory. I had to cut through the paper and pull the wires down from the top of the former to where the windings start in order to make connections using the factory collar. Below the paper, you’ll find the wires are insulated and covered in glue. This was particularly difficult to clean and prep for a good solder connection.

    If I had to do it all over again, it would go much smoother. A bit of a learning curve modifying parts to work.

    Spider that works with the 8w7 with some modification – https://thelordofbass.com/product/6-x-2-flat-linear-roll-spider-2/

Add a review

Your email address will not be published.

Scroll to Top