JL Audio 10W6v2 12W6v2 Dual 2 Ohm Voice Coil

JL Audio 10W6v2 12W6v2 Dual 2 Ohm Voice Coil

Is  your JL Audio 10W6V2/12W6V2 subwoofer no longer playing or not working properly? Contemplating on buying a new one? Well think twice before you drop another $749.99-$879.99. Why buy new a subwoofer when you can repair your old subwoofer for a fraction of the cost?  The most common parts that need to be replaced on the 10w6V2/12W6V2 subwoofers are the surround, spider and voice coil which can all be purchased on our website. If it’s just the surround that you need to replace then your in luck which is much easier fix.  We offer the surround kit which includes the glue bottle. Worst case if the voice coil is bad then you will need the spider and voice coil as long the surround is fine. You must reuse the cone and the voice coil collar off your old subwoofer being that those parts are patented by JL Audio and no one has the rights to sell or copy them.

Never fixed a subwoofer nor have an idea how to begin, no problem YouTube is your #1 source for all your research videos on fixing your subwoofer.  Our aftermarket JL Audio 10W6v2 12W6V2 dual 2 Ohm voice coil is the exact replacement for all JL Audio 10W6V2-D4 and 12W6V2-D4 subwoofers rated at 600 watts rms same as oem.

In order to properly fix or build a subwoofer you need to make sure your using the proper glues. When gluing the voice coil to spider and cone you need to make sure you use black rubber toughened CA glue. For gluing the surround lip to the frame we recommend using use our L3045 black rubber glue. Same goes as well for gluing dust caps and dressing leads. 

• Former Height:  4.2″  (106.7mm)
• Winding Width: 1.65″  (41.9mm) 
• Outer Diameter: 2.84″  (72.1mm)
• Inner Diameter: 2.73″  (69.3mm)
• Impedance: Dual 2 Ohm
• Layers: 4
• Former Material: Kapton 
• Wire Material / Type: Flat aluminum wire